Tifton & South Georgia
Hardwood Floor Refinishing
Bring a worn hardwood floor back without replacing it.
Registered Georgia LLC
GA Control #21017302
Flooring Is All We Do
Install, refinish, repair
Family-Owned & Local
Tifton since 2021
Free Estimates
No obligation, no pressure
How we approach it
Sanding, staining and a fresh protective finish — often far less than replacement.
A scratched, dull or sun-faded hardwood floor is very rarely a floor that needs replacing. If there is enough wear layer left to sand, refinishing gets you back to bare wood and lets you choose a completely different color — for a fraction of what a tear-out and reinstall would cost.
We sand in stages, from a coarse cut that takes out the old finish and the deeper scratches down to a fine screen that leaves the wood ready to accept stain evenly. Edges and corners are done by hand so the perimeter matches the field instead of showing a halo.
You pick the stain from samples applied on your own floor, in your own light — not from a chip in a showroom. Then we seal and finish, and give you clear instructions on how long to stay off it and when furniture and rugs can go back.
What's included
What you get with this service
Written into the estimate, so there is no debate later about what was and wasn't part of the job.
- Assessment of the existing floor — wear layer, board condition, previous finishes
- Multi-stage sanding, with edges and corners cut in by hand
- Stain samples applied on your floor so you choose in your own light
- Sealing and protective top coats
- Dust-conscious process with containment and vacuum-assisted sanding
- Clear cure times and aftercare instructions before we leave
Why Baltazar Floorcovering
What we do differently on hardwood floor refinishing
- 01
Honest assessment first
If a floor genuinely cannot be saved we will say so. We would rather lose the job than sand through somebody's last wear layer.
- 02
Color chosen on your floor
Stain reads differently on every species and every room's light. Samples go down on your boards before anything is committed.
- 03
Dust taken seriously
Containment and vacuum-assisted sanding keep the mess in the work zone instead of through the whole house.
Questions
Hardwood Floor Refinishing — the things people ask
How do I know if my floor can be refinished?
It comes down to how much wood sits above the tongue. Solid hardwood can usually take several sandings across its life; engineered plank depends entirely on the thickness of its top veneer. We check at a vent or a threshold where the edge of a board is visible and tell you what you have.
How long before I can walk on it?
That depends on the finish system we use. We will give you specific times for walking, moving furniture back and putting rugs down before we start, so you can plan around it.
Do you offer free estimates?
Yes. Every project starts with a free, no-obligation estimate. We measure the space, talk through your material options and give you a written price before any work is scheduled.
Also from us
Other flooring services
Free, no-obligation estimate
Get a price for hardwood floor refinishing
Tell us the rooms and roughly what you have in mind. We'll come out to measure across Tifton and South Georgia, then put a written price in your hands.